How to Replace Bathroom Tiles That Have Fallen Off

Do you have bathroom tiles that have seen better days? Maybe they’ve started to fall off and now you’re wondering just how to get them back on. Well, it’s not as difficult to do as you might have thought to repair bath tile. In general, you just need the tiles that you’re going to put up, a scraper, grout and tile cement. So, with just those few pieces you’re going to have the ability to get that bathroom of yours looking just the way you want it again. What are you waiting for?

The first step to repair bath tile is to remove the grout or tile cement that’s still stuck on the wall. Generally, when a tile falls off, at least some of this is still left behind and that gets in the way of you trying to put up the new tile. You’re going to need new cement and grout so use our scraper and very carefully and gently remove this. Remember, there’s a waterproof membrane behind the tile cement that you still want to keep intact.

Once you’ve removed everything from the wall you want to make sure that you have the right tiles for the right spot. Once you put them up you’re not going to get them back down easily and you’re not going to get them down in one piece at all. So, make sure that you check to make sure it’s exactly what you want and you have it oriented the right direction (if that’s something that’s important with your tiles). From there, apply a thin layer of tile cement on both the wall where you’re going to put the tile and on the back of the tile. You want to make sure you keep the layer thin because it needs to seal well against the wall. 

Next, push the tile directly into the wall where it needs to go. Push on each side and the center to make sure that it’s not sticking out or angled. You want it to be flush with the other tiles and centered in the space because you’re going to need to put grout around the outside to make sure that it’s well sealed and that it stays watertight. You want the grout to look even all the way around when you do put it up so a centered tile is a good idea

Finally, you want to make sure that you wait a few hours for the tile cement to dry. This takes a bit of time, but if you wait it’s going to more firmly attach the tile and the cement will keep it ready for anything. Then you just put a little bit of grout into each of the joints and areas where this tile meets up to the ones next to it. You want your scraper at about a 45 degree angle to make sure you push as much grout in as you can, and scrape off any excess that spills over the top. Once it all dries, just sand it down slightly under flush with the tile and wash the tile itself to remove anything else. 

Toilet Weight Limits: How Much Weight Can a Toilet Hold?

The last thing you want to happen to you is your toilet giving way while you are taking a dump because you have exceeded your toilet’s weight limit. Yes, toilets too have weight limits. Besides getting embarrassed in case your toilet gives away beneath you, there is the potential of you getting injured as a result. You might also end up damaging your bathroom. 

So how much weight can a toilet hold? Well, a toilet seat weight limit depends on the type of toilet. There are two types of toilets that are in use today; floor-mounted toilets and wall-mounted toilets. 

Floor Mounted Toilets

Toilets mounted on the floor have higher weight limits as compared to those that are hung on the wall. They can support a lot of weight since they are attached to the floor. An average floor mounted toilet has a weight limit of 1000 pounds, which is around 453 kg. 

This means that a floor-mounted toilet can support anybody, no matter how much your weight is. This toilet is ideal for you if you are a heavy person or if any of your family members is heavyweight. Floor mounted toilets have less complicated plumbing system hence are very easy to install and maintain. 

Wall Mounted Toilets

These types of toilets are attached to the walls. As a result, they have none of their parts touching the floor. Since their cistern is built into the wall cavity, all their plumbing system is located in the wall. Wall-mounted toilets take up less space as compared to the floor-mounted ones. 

Since they do not touch the floor, they have lesser weight limits as compared to floor-mounted toilets. An average wall hung toilet has a weight limit of 227 kg or 500 pounds. Although the weight limit is still capable of supporting even the heaviest users, the toilet may also get loose over time if you are a heavy person. 

Are the Toilet Weight Limits Safe?

In Europe and America, an average man weighs about 195 pounds while an average woman weighs 160 pounds. In cases where one is severely obese, they rarely weigh more than 400 pounds. Therefore, a floor-mounted and a wall-mounted toilet weight limit is more than adequate to handle the weight of any user. 

Why Do Most Toilet Brands Fail to Mention Weight Limits?

Given the rising levels of obesity in the country and in the world as a whole, it is very strange for toilet brands to fail to mention weight limits for their products. However, some leading toilet brands mention every feature of their products. It’s a great marketing advantage for any brand to mention toilet weight limits to its customers.

Pros and Cons of Wall Hung Toilets

Although wall-mounted toilets are not as popular in America as they are in Europe, their use is steadily growing in America. Perhaps this is due to the various advantages it has over floor-mounted types. Since they are attached to your bathroom walls, they have a smaller footprint, making them perfect for smaller bathrooms. 

A wall hung toilet also looks stylish and will give your bathroom a modern look. Cleaning your bathroom and keeping your floor dry will also be easier since the toilet does not touch the floor. 

On the other hand, the biggest disadvantage of having a wall-mounted toilet is the cost. Besides it being quite expensive, you will also have to pay more for the installation. You may also have to deal with more leaking as compared to when you are using a floor-mounted toilet. 


A toilet is an important component of your bathroom. Ensuring that it is in a good state and can handle all types of users is very important. When looking for the best toilet for your bathroom, it is important to consider its weight limit.

So how much weight can a toilet hold? The good news is that a standard toilet weight limit of 1000 pounds is more than enough to handle the weight of any user. Wall-mounted toilets too have a weight limit that is safe enough to handle even a severely obese user.